|
Denso original Denso original Denso 095000-8810 Common Rail Injector RE532216 DZ100218 Diesel Fuel Injector Nozzle for 4045T 6068T S350 Construction Machinery new injector original new injector
| Brand Name: | DENSO |
| Model Number: | 095000-8810 |
| MOQ: | 1 |
| Packaging Details: | Original Packing |
| Payment Terms: | T/T, Western Union |
Denso diesel fuel injector nozzle
,Denso common rail injector RE532216
,Denso diesel injector for 4045T
Denso original Denso original Denso 095000-8810 Common Rail Injector RE532216 DZ100218 Diesel Fuel Injector Nozzle for 4045T 6068T S350 Construction Machinery new injector original new injector
|
Fuel Type |
Diesel |
|
Condition |
New |
|
Applicable Engine |
John Deere 4045 (4-Cylinder, 4.5L) and John Deere 6068 (6-Cylinder, 6.8L) common rail diesel engines |
|
Injector Type |
Electronically controlled high-pressure common rail diesel injector (DENSO G2S second-generation electromagnetic type) |
|
Quality Standard |
Original-type specification, precision-tested, calibration-coded for direct OE replacement |
|
Packaging |
Individual sealed protective packaging to keep injector clean, dry, and capped until installation |
|
Fuel System |
Common Rail (high-pressure up to 1800 bar, electronically controlled injection with calibration code correction) |
|
OE Number |
095000-8810 |
|
Brand |
DENSO |
|
Cross Number / Universal Number |
0950008810, RE532216, RE533454, RE546780, DZ100218, SE501934, 095000-6880, 095000-6881, 095000-6882, 095000-8811, 095000-8812, 095000-8813, 095000-8814, 095000-8815 |
|
Vehicle / Equipment Application |
John Deere 4045 / 6068 engine service across agricultural tractors, harvesters, sprayers, loaders, construction machines, industrial power units, engine rebuilds, and common rail injector repair. Also suitable for agricultural machinery repair shops, John Deere service centers, fuel injection workshops, engine rebuilders, importers, and spare parts distributors. |
|
Application Type |
OE-type replacement injector for service, repair, and engine remanufacturing |
The DENSO 095000-8810 is an electronically controlled high-pressure common rail diesel injector built for John Deere 4045 (4-Cylinder, 4.5L) and 6068 (6-Cylinder, 6.8L) engines. Based on the proven DENSO G2S second-generation electromagnetic platform, it operates at injection pressures up to 1800 bar and uses a calibration code to correct injection quantity, ensuring precise fuel metering, accurate timing, and fine atomization for clean and efficient combustion across tractors, harvesters, sprayers, loaders, construction machines, and industrial power units.
This OE-type replacement injector matches original specifications for 095000-8810, RE532216, RE533454, RE546780, DZ100218, and SE501934, and is also cross-referenced with 095000-6880, 095000-6881, 095000-6882, 095000-8811, 095000-8812, 095000-8813, 095000-8814, and 095000-8815. The electronic solenoid controls injection pressure, timing, rate, and quantity, helping to improve power output, fuel economy, emissions, and noise level while supporting reliable cold starting and steady idle under heavy field and worksite loads.
For correct installation, use clean diesel only, replace the fuel filter, install new sealing washers, and register the calibration code when required. Injectors must remain sealed, capped, dry, dust-free, and protected from impact during storage. Before replacement, technicians should inspect the fuel filter, high-pressure pump, rail pressure sensor, suction control valve, pressure relief valve, wiring harness, turbo, air intake, compression, and ECU command to confirm the injector is the actual cause of hard starting, rough idle, smoke, power loss, high fuel consumption, or rail pressure deviation.
Contact Detail:
ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province Tel:+86 020 88557755
Cellphone:+86 19959162250 WhatsApp:+86 19959162250
Email:2209396088@qq.com
